Hi there,
I've problems with my AV Receiver "Onkyo TX-SR608". First I tried most every Onkyo-Codes in all lists– nothing works. I tried to learn all buttons from my old remote. No result. The "re" says learning was fine – but it was'nt.
Any chance that the Onkyo AV-Receiver code can be added?

Best regards,
Bardioc7

Hi,

Code 1531-2 is a good basic. Not all buttons works fine, but for theese learnings works.

So many thanks for helping me.

Best regards,
Bardioc7

WBB said:

Bardioc7 said:

Hi,

Code 1531-2 is a good basic. Not all buttons works fine, but for theese learnings works.

So many thanks for helping me.

Best regards,
Bardioc7

---

Excellent. Thanks for the feedback.
WBB

I've got the same problem with the Onkyo TX-SR508 and agree that the 1531-2 remote layout is correct for this device too. However the codes behind the selection are invalid and incorrect.

Could you not fix the 1531-2 selection so that the codes match the ONKYO RC-764M and then we would not need to "Learn" 56 buttons? In my house that means 448 buttons for the 4 'iPad/Phone/Pod' devices we use.

WBB said:

I believe we have tracked down the codes for the RC-764M and will add it to the database. PS you don't have to learn the buttons on each of your iOS devices. Use Bump to copy the settings instantly from device to device.
WBB

Thanks for the response and advice, I certainly appreciate the service. Any idea when the update will be applied/distributed? Days/weeks/months?